Putting together a Rubbermaid style cab I used what I had available to make a easy carbon filter.
Two matching planter bottoms that are a little smaller than the bottom of a five or three gallon bucket
Fine mesh, enough for two pieces a few inches larger than bottoms
A desk fan, I toke the base off - cut out the top of a five gallon bucket and attached with zip ties
Five gallon bucket

Fit desk fan into lid of bucket…pic 1 & 2

Cut out approximately five inch holes in each of the planter bottoms and one the same size in top of cabinet. I used plumbing adhesive and drywall screws to fasten one of the planter bottoms to the top of cabinet. Pic 4 & 5

Place mesh screen over planter bottom, pour in enough activated carbon to make even ½ inch layer. Put second piece of screen over top, push down planter bottom and fasten two together with drywall screws. Pics 6, 7 & 8

Trim any excess mesh and set bucket on top of planter bottom carbon filter..
1.JPG

2.JPG

3.JPG

4.JPG

5.JPG

6.JPG

7.JPG

8.JPG

9.JPG

10.JPG

__________________
I have trouble telling the difference between reality and fantasy and for sure nothing I have to say here has anything to do with reality. I couldn’t afford World of War Craft so this is much cheaper entertainment.