i have about 1 oz of good trim ?and i want to play ?

one toke bloke

i have about 1 oz of good trim?and i want to play .has anyone got any good idea for it eg;that alcohol technique /butane/oil/etc.etc you know what i mean ?do i have a nuf good trim,i have some bad trim i can add in the mix
thanks
otb

4everhydro

you could try using a one liter bottle or small pop bottle and make some holes in the cap of the pop bottle and poke one in the bottom with a hot wire or something then get some butaine 3-4 cans.first you want to get your trim and load it into the bottle oh and by the way make it is grinded up pretty good you do this with a coffie grinder.after you load the bottle get a couple pieces of cheese cloth and put them over the top of the bottle then put the cap on over the cheese cloth,then take the adapter from the butane (this is usually in the cap of the butane)and place it in the hole you melted in the bottom of the pop bottle now get your butane cans ready and start by discharging all of the cans one by one into the bottom of the pop bottle using that adapter the cheese cloth will filter the trim and nothing but sweet honey oil will exit the pop bottle of course youll have to wait untill the butane evaporates befor you can collect the oil.

green_nobody

the easiest would be to blend your trim for a few seconds in isopropanol - but watch out, that stuff is almost as flammable a ether (not that this means these substances would be totally unsafe to work with) so just cut the toking for a moment and you will be fine after blending it thru in iso you drain the iso, which is now containing the THC, thru a coffee filter and let the isopropanol vapor off in a flat pan - and again no fire or open flammes here. rather use a hot water bag to speed up the process. in the end take a scraper and get teh honey out (if you heat it up a bit before this last step you really ease the job) and fill it in a tiny jar or whatever you have

__________________
Keep the gun oiled and the thumb green!

http://www.pch.gc.ca/progs/cpsc-ccsp...Canada-eng.MP3

wb456

I prefer the alcohol process as Green described. You could put the pan on a heating pad to expedite evaporation. I think the butane stuff is nasty. If you do not want the green (chlorophyll) water cure it first. It will then look like Honey Oil.

one toke bloke

thanks every one i will do some home work and i will get back at due time
ps posted some more pictures on my2008 season
otb

green_nobody

by using ethanol you might end up with some weired sugary taste sometimes, with iso that never happens, also is iso a stronger solvent then ethanol which makes the extraction quicker and evaporates faster. heating a pan on your stove is by the way not the best idea as you easily cross flaming point of the solvents used - rather stick with hot water bags for that part and a fan - but that just my personal 2 cents on that method

__________________
Keep the gun oiled and the thumb green!

http://www.pch.gc.ca/progs/cpsc-ccsp...Canada-eng.MP3

one toke bloke

quick note
had a try butane method with bad trim got very good result an really enjoyed the fumes ? and doing it !!! i have another good subject to discuss with you lot !will have a go on the weekend too busy till then
otb

Mr. Super Radmacho Man

Butter

__________________
"Proud to be a part of this Wonderful Community"
-Mr. Super Radmacho Mahn