Question about Oxy-plus strength 50% - Rockwool Pre-Soak
Hey guys,
I know this might have been asked a few times, there's been lots of discussions regarding this I know, but I have yet to get a certain answer so don't mean to sound like a broken record, just this stuff can mean life or death for plants if you over do it...
From what I know there are 3 different strengths of oxy-plus (H202) which are 17.5%, 35% and 50% and there are alot of different guides for sterilizing rock wool cubes for cuttings.
Alot of cloning tutorials say 20 drops(2ml) of oxy-plus per Litre of water and PH adjusted to 6.0 with 1ml superthrive to make up pre-cutting soak water.
Problem is, It doesn't say which strength of oxy-plus being used in any of the guides i've seen it just says "20 drops/2ml oxy-plus Per/L"
I am about to make up 40 cubes for 40 cuttings in my terrarium and will be making up 10litre of soak solution using 50% H202.
So what I was wondering if any of you peeps have experience using 50% H202 for making up soak solution for your rock-wool solution, would very much appreciate if you could enlighten me about ratios per/L for said strength of Oxy-Plus.
This is my Soak-water ratios that I have thus far, but just want to confirm that it will be suitable for my new cuttings.
- 10 Litres Fountain Spring Water
- 20ml 50% Oxy-Plus (H202)
- 10ml Superthrive
- 1/4 Strength Bloom - Hy Gen
I will be soaking these overnight then transferring to my Terrarium maintaining 70% Humidity on Heat mat With thermostat set to 25c under 28w Cool white flouro.
Let me know what you think guys, thank you in advance for your help.
Last edited by bigbudz; 11-28-2008 at 12:05 PM.
|