View Single Post
Old 08-29-2008, 11:29 PM   #5 (permalink)
snickelfritz
Cannabis Activist
Admin
 
snickelfritz's Avatar
 
Hexxagon Champion!
Location: Andromeda Galaxy
Gallery: 6
Thanks: 274
Thanked 278 Times in 144 Posts
snickelfritz has a brilliant futuresnickelfritz has a brilliant futuresnickelfritz has a brilliant futuresnickelfritz has a brilliant futuresnickelfritz has a brilliant futuresnickelfritz has a brilliant futuresnickelfritz has a brilliant futuresnickelfritz has a brilliant futuresnickelfritz has a brilliant futuresnickelfritz has a brilliant futuresnickelfritz has a brilliant future
Activity Longevity
10/20 10/20
Today Posts
0/0 ssssss469
Smile Same basic technique, but with PORN added!!!

Hope you find this useful!

Quote:
Originally Posted by Mrgreenjeans
If you want to do Hydro than this system is the easiest one out there in my opinion.
To start out you need a bucket to grow in. (The bucket needs to be black or you need to make sure NO light passes through it so you don't have any algae and slime problems where the roots will be in the bottom of the bucket. If you need to wrap the bucket in duck tape, or paint the outside of the bucket. ) The bucket can be from a 1 gallon bucket to a 5 gallon bucket. That is what most people use…
You will need a couple of tools for this part, Take a drill and a 1 inch drill bit and drill a hole 2 inches from the bottom of the bucket. ( a smaller bucket , say 1 gallon you may want to place the hole about 1.5 inches from the bottom) See picture


Next, you take a piece of vinyl screening and cut out a piece of screen to be glued inside of the bucket. See pictures




The next thing I do is take some PVC glue used for plastic plumbing, and apply some around the hole on the inside of the bucket and then some on the edges of the screen, and then glue it in place. See pictures
Note: Some plastics the glue will not stick to so you may need to use something like Gorrila Glue etc etc etc...





This is the finished Hempy bucket. You fill the bucket with a mix 1 part vermiculite and 3 parts perlite and water as you would soil. Remember that the water sitting in the bottom is a reservoir that holds the Nutrients and water. you should only have to water about every 3 days. I plant either clones or seeds started in a starter plug. The plants get there water and nutrients from the reservoir in the bottom of the pot. Only water till water starts to come out of the hole that you installed, The hole is for the excess run off, then you stop watering.
I use a pan under the bucket or you could place them on flood table of some sorts that all the run off can drain into.
Remember if you are growing using the Hempy method, as with any grow method that it's always better to start out with less Nutes than to much so as not to burn your plants and build up to what the plant likes....
Happy Growing


Here is a picture of some Bubblelicious I grew Hempy style. You will also notice the hole in the bottom of the pot...the final product growing Hempy!!!

























__________________
What gives a government the right to outlaw nature?



War is when the government tells you who the bad guy is. Revolution is when you decide that for yourself
.

Snick's MySpace Page
snickelfritz is offline   Reply With Quote
The Following 2 Users Say Thank You to snickelfritz For This Useful Post:
HUMAN (10-26-2008), medhed (12-31-2008)